Valentine's Day heart ornament or bowl filler {tutorial}

A cute little addition to your Valentine's decor and a great way to use up some of those scraps! :)

Supplies:

Fabric

Jute or twine

Filler

Needle, thread and pin

Embroidery thread (optional)

How to:

Cut two hearts. (Mine are about 4 inches wide.)  Cut a piece of jute about 7" long.  Pin jute upside down to the right side of the fabric, then place second heart over the top and pin in place, right sides together.  (You're making a teeny-tiny pillow!)  

Sew around the edged, leaving about 1 1/2" open...

 ...so you can turn right sides out and stuff.

Hand sew closed.  

Make some more in fun Valentiney colors.

 You can even stitch some XOXO's on with embroidery floss!

 I made one out of leftover cream burlap.  This one I just sewed together leaving the raw edges out.

Toss them all into a cute bowl.

 Or hang them on some branches.

Appliqueing with knit {quick tutorial}

This is a Birthday gift for my little nephew.  (Happy 1st buddy!!!)  My sis had mentioned that he didn't have many long sleeve shirts, so here ya go!  (This is in addition to the huge box of clothes and toys I'm sending up that my little man has grown out of.)

I grabbed a couple shirts at the store, brought them home and washed them.  I usually wash the fabric first if its something that's going to be worn and washed.

I posted a full tutorial on appliquéing clothes here so won't do that again.  Will just highlight any differences between cotton and knit.

I opted to use knit material for this set, where I usually use cotton.  I like the knit because it doesn't fray, but doing the "m" was a little tricky and the knit wasn't a "firm" as cotton is when cutting and trying to place the applique.  The other barely noticeable difference is when I got to the tiny edges (like star points) the knit gets pushed into the shirt with the needle, so you have to be really careful.

Other than that...sewing challenge #35 and #36, check and check.

Simple Superhero Cap and Cuffs {tutorial link}

 

My son was invited to a Birthday Party and like always, I ask the mom what she wants the kiddo to have as a gift.  (A mom's and kid's idea of a good gift often differ, plus I wouldn't want to get them something they already have! :)

She knows me well and knows that I rather enjoy crafting, so sent me this link that she found on pinterest.  Blankets weren't staying tied on when used as capes, so something else was needed. Never fear....Kelly to the rescue.  :)

The tutorial is great, I just made a few minor modifications.  

I bought 2 tshirts at the Dollar Store, since they weren't on sale at Hobby Lobby this week.  From now on....I'm saving the shirts that dear hubs donates.  This is such a perfect gift!!!

I opted for snaps (at the mom's request) at the neck instead of velcro, but am going to let them be tested and can add velcro if snaps seem to be cumbersome.

I used the green scraps to make these appliques.  I cut 3 squares bigger than my star shape out of wonder under, ironed them to the knit scraps, then die cut the stars (you can trace and hand cut though), ironed onto cape, and then stitched with contrasting thread.

I used a freezer paper stencil that I cut with my silhouette to put the "M" on the back.  The Birthday Boy's name started with an "M."

It wasn't very nice of me to have my sweet boy model for me then make him take it off so I could wrap it. 

No worries....I promised him a set of his own.  Hopefully he will forget until Christmas! ;)

Since I sewed on the appliques and the cuffs, this is SC#31....wow I am sooo behind!

Fall Burlap Pennant Banner {quick tutorial}

A quick and easy fall banner.

Supplies:

Burlap

Acrylic Paint and brush

Permanent marker (to match paint)

Jute

Sewing machine and matching thread or hot glue

How to:

I die cut my burlap, but you can easily cut the shape with scissors.  I used my computer to write "fall" then sized it to what I needed.  Print the letters in outline.  Using either a lightbox or your window, put the burlap over the paper and trace the outline with a permanent marker.  Paint in your outline.  Be sure to put a scrap piece of paper under your work, so it doesn't bleed through on your desk/counter.  Let dry.  (Crucial step.  Trust me.  I had paint all over my sewing machine because I was too impatient.)  Line up your pennants in order and sew the burlap onto the back of the pennant using a zig zag stitch.  (This would have been a bit easier if I had used a cording foot, but once again...too lazy/impatient to get it out.)  Optionally, hot glue or fabric glue the jute to the back.  Or hand stitch.

Here it is on my (undecorated) mantle.  Hey, its still September....for one more day.  

It was 90 here yesterday.  Not feeling too fallish yet.  

Tomorrow.  Tomorrow I'll decorate.  Then it will at least be October!

A really simple skirt

Really, this was a simple skirt to make.  I think it maybe took 30 minutes...including interruptions from my offspring.  In fact, I was sewing this the evening before the first day of school.

Thanks to Dana from Made and her Simple Skirt Tutorial, I ran out the next day and bought more material to make more skirts for the girls.  I might even make myself one!

For this one, I already had the fabric and elastic on hand.  Yes I'm a hoarder....I like to call it being prepared.  You never know when on the night before the first day of school your 6 year old is going to complain that she has nothing to wear and you need to whip up a simple skirt.  I was prepared!

And look at these adorable Hide-eez.  I'm getting them for all the girls.  In multiple colors.  I also took a stab at making a pair out of legging that my 8 year old tore a hole in the knee, but that's another tutorial.

{Sewing Challenge #30}

Simple shirred sundress or top or skirt {quick tutorial}

First off...sorry for the picture.  I will try to do better!  Its coming to the end of summer and I've not been nearly as productive as I thought I would with all the munchkins home. :)

This was a super simple project.  So easy, that I made 2 (one for my #2 and one for me) and will be making 2 more (one for #1 and #4).  Mine is a skirt or  I can wear it as a top, then accessorize with a belt around the waist (as to not look maternity) and once it cools off a cardigan.  #2's is a dress that she'll sometimes tuck in the straps and wear as a long skirt.

Supplies:

Shirred fabric (or you can shirr your own.)

Coordinating ribbon

Sewing machine and thread. 

How to:

I've always seen this shirred fabric at Hobby Lobby and finally picked some up.  Measure your subject around the chest, and buy accordingly.  Make sure when you buy it, you measure the shirred part of the fabric and not the bottom edge.  Cut, fabric about an inch or so smaller than measurement.  I held it up to #2 here and tested for fit, then cut.  My fabric has a pattern so cutting straight was easy.  I used scissors, not a straight edge.  Sew a seam straight down the back with right sides together.  I surged mine, but a zig zag would work too.

You could leave it as is at this point, which is what I did with mine.  I'm rather well endowed, ahem, so have no problem holding the fabric up when I wear it as a shirt.  This little girl...not so much yet, so I made a "strap" to keep it in place.

Its just a ribbon I pulled out of my stash, cut in half, end folded under 1/4" and hemmed to the top of the dress on the inside.  Once again, I had her put the dress on and carefully pinned where they should go.

Heat sealed the ends of the ribbon.

So easy!!!

 This is sewing challenge #25 and 26 (since I made one for me, too!)

Camera Strap Slipcover

For my first one...

(yes, I said first...I'm going to make another...a girl's gotta have options, right? :) 

...I decided to skip the ruffle.  I wanted to make sure I was going to like it and it would fit before I "ruffled" it.  Plus, I didn't have a fabric I liked on hand (hard to believe), and its after hours at my local craft store.

Not bad for timing; I found/posted the idea here and its not even 6 weeks later.  And its summer.  And I have all 4 kids home.  And family in town visiting.  

But I snuck a way to my office for a bit and sewed.  I sewed something for me!  (I haven't been doing much of that lately.)  Anyway...the only change I made from the tutorial I followed was to top stitch both sides.  I'm a symmetrical person so had to have it even.

I lengthened the strap an inch because I made it to fit my camera strap.  I love that its removable and washable.  It only took 45 mins and that included getting everything out and cleaning everything up AND I was watching a movie.  The next one will go much quicker.

{This is sewing challenge #22...I'm a bit behind so must get moving!}

Ruffle Camera Strap {tutorial link}

 This one?      or      This one?  

The one on the left is by PriddyCreations (tutorial here.)  I like this one because its padded and a slipcover.  

The one on the right is by Crap I've Made (tutorial here.)  I like the ruffle on it. 

So....I'm going to combine the two! :)

Shabby Bench Redo

If only I could whistle.... :)

This is what it looked like when I found it here.

Dontcha just love those legs???

Slap a little white paint on it...distress it a bit...throw together some sage burlap and voila.

.......

OK....so it wasn't quite that easy....but I'd do it again!

Since the burlap is a weave and not solid, I recovered the top with a white sheet first so you see the light through burlap, not ugly mauve.  

(No offense to anyone who like that color.)

I cut off the original cording.  I first attempted to truly reupholster it, but this baby was made well.  I could not get even the first few staples out, much less the hundreds that were used.  (And I wasn't about to ask for help from the hubs since he's less than thrilled that I have all this extra furniture in his garage anyway!  You think he'd be happy that I'm finally moving some out!?! :)

See the pretty ruffle?  I used the selvage edge of the burlap so I didn't have to hem the fabric before I ruffled it.  I was feeling lazy creative.

She is for sale here.  I secretly hope she doesn't sell, cuz I kinda want her at the end of my bed...but I guess that's not really a secret now, is it? 

{Sewing Challenge #20}

Linking Here:

Applique Monogrammed Onsie {tutorial}

 

This was one of my baby shower gifts for my friend (does the fabric look familiar).  The process is very similar to my heart applique shirt and my knee patches.

Supplies:

Clothing

Fabric

Wonder under

Iron

Pencil

Scissors

Optional: machine stitching edges

How to:

Figure out what letter you want (I use a template.) Cut a piece of wonder under a little bigger than your final shape, and a piece of fabric a little bigger than your wonder under.

Iron WU onto fabric per included instructions.  Flip it over and trace or draw your letter onto the back.  IMPORTANT: Draw your letter in reverse.  

Cut it out, peel backing of your letter, place in center of your shirt and iron on following instructions.

 With that, you can be done, but you can also take it a step further and sew the edges of the letter.  I use heave duty wonder under that says "no sewing needed" but I always finish it off.  I have found that maneuvering those tiny little onsies on my sewing machine is a little bit easier if I take off my tool box.  Also make sure when you are sewing you are only sewing the top layer!  (Ask me how I know that?? ;)

I straight stitched my edges this time, but sometimes I zig-zag.  Just depends what kind of mood I'm in.  Around the tight little corners, I don't use my foot pedal and "hand crank" the machine.

There you go!  You can put these on blankets, bibs, burp cloths, you name it! 

(This is also Sewing Challenge #19)